• Foldable greenskin ruins full 11th Edition terrain table, 30 pieces
  • Foldable greenskin ruins table configured with two-storey buildings only
  • Large greenskin ruins, three storey design A, folds flat to one inch
  • Large greenskin ruins, three storey design B, folds flat to one inch
  • Large greenskin ruins, two storey design A with removable floor panels
  • Large greenskin ruins, two storey design B with removable floor panels
  • Long greenskin ruins built from centre section and two end wings
  • Double cargo container, 5.1 x 2.5 x 5.0 inches, greenskin ruins style
  • Small greenskin ruins corner scatter pieces, four designs
  • Short line greenskin ruins, high and small variants
  • Greenskin full colour scheme: primary and secondary colours, shown on a printed sample
1 11
EMPTY DOM REMOVE PROTECTOR

Foldable Greenskin Ruins 11th Ed Competitive 40k Terrain Table: Full Set or Singles

Foldable Greenskin Ruins 11th Ed Competitive 40k Terrain Table: Full Set or Singles

EMPTY DOM REMOVE PROTECTOR

$230.00
$308.00 $230.00
Sale Sold out
Shipping calculated at checkout.
EMPTY DOM REMOVE PROTECTOR

Add footprints to complete your table

EMPTY DOM REMOVE PROTECTOR
EMPTY DOM REMOVE PROTECTOR
...
......
...
EMPTY DOM REMOVE PROTECTOR
Made in Canada

Ships from Canada

No duties or customs fees
EMPTY DOM REMOVE PROTECTOR

A Full Greenskin Table That Folds Flat

Every building in this set hinges shut to about an inch thick. A complete 11th Edition table collapses into a stack you can carry in one hand. Set up in minutes, pack down in minutes, and stop losing a shelf to terrain you only use on game night.

Key Features

  • Ships assembled and ready to play: unfold it and put models on it
  • Folds flat for storage and transport: printed hinges, no glue, no magnets
  • Every ruin folds to under an inch thick, so a full table stores flat instead of eating a shelf
  • Multi-storey ruins you can actually fight over: models place on upper levels, not just around the base
  • Built to the 11th Edition area terrain layout, with each ruin sized to its official terrain footprint
  • Scavenged timber, patched plating and corrugated mesh with crude painted skull banners, from three-storey shanties down to corner scatter
  • Jagged, plank-braced walls with irregular silhouettes that block line of sight
  • Material: non-toxic PLA. Grey and Black are single colour, and Multicolour is printed in the Greenskin full colour scheme with nothing to paint. Multicolour is a pre-order that ships the week of October 26.
  • Pairs with the Indus Layout Footprints, sold separately
  • Optimised for 28mm/32mm grimdark and sci-fi wargaming

What's Included: Full Table Set

  • 4× Large Ruin, Three Storey (two designs, up to 7.7" tall)
  • 4× Large Ruin, Two Storey (two designs, 4.9" tall)
  • 2× Long Ruin, four parts each: two centre sections and two end wings (8 pieces)
  • 2× Short Line High Ruin (6.0 × 4.3") and 2× Short Line Small Ruin
  • 8× Small Ruin corner scatter (eight designs)
  • 2× Double Cargo Container (5.1 × 2.5 × 5.0")
  • 30 terrain pieces, 56 printed parts in total

Starting smaller? The Starter Table option gives you one of every piece in the set: 15 terrain pieces, enough to build up a board over time or split a full table with a friend.

The same folding system comes in six styles: Gothic, Armored, Industrial, Greenskin, Space Dwarf and Battle Nun. All share footprints and heights, so they mix freely on one table.

(Miniatures shown for scale not included – This is an unofficial 40k product, we are not affiliated with Games Workshop)

Designed by FabricatorsLair.

Licensed and produced by Tabletop RPG under commercial agreement.

Products inspected prior to shipment. Custom print resolutions and scales available upon request.

EMPTY DOM REMOVE PROTECTOR
View full details

DEPLOYS IN SECONDS

Flat to a three-storey ruin in seconds

No clips, no glue, no instruction sheet. Every building ships assembled, so you open it out, set it down and start placing models. Packing up at the end of the night is the same few seconds in reverse.

STRONG & DURABLE

Don't baby it

No clips, no glue, no instruction sheet. Every building ships assembled, so you open it out, set it down and start placing models. Packing up at the end of the night is the same few seconds in reveMost terrain gets treated like it might not survive the trip. Wrapped in foam, boxed, carried flat across the car park. Skip all of that.

Fold these, throw them in a bag with your army case and a rulebook on top, and they turn up ready to play. Drop something heavy on one and it takes the hit. There's no glued join waiting to fail, because the hinges are printed as part of the building.

It's terrain you use, not terrain you look after.rse.

PACKS DOWN

Under an inch thick, folded

Rigid terrain stores at full height because it has no choice. Every ruin here hinges shut to under an inch, so a complete 30-piece table stacks into something you carry in one hand instead of losing a shelf to it.

★★★★★

"I received it yesterday. I'm really happy with the result, honestly. I'm painting them at the moment."

Maxim L.

Grey or black? Both ship ready to play

  • Armored ruins large three storey A, ribbed gable facade, unpainted grey

    Grey

    Pick grey if you intend to paint. Primer sits evenly on it and drybrushed highlights read clearly, so edge work shows up the way you meant it to. It's also the easier one to photograph if you post your table.

  • Armored ruins large three storey A printed in black

    Black

    Pick black if you want it menacing on day one. It reads as shadow and depth straight out of the box, with no primer, no brush and no drying time. Harder to paint over later, so choose it if the plan is to play rather than paint.

Actual Product Photos

Shot on a phone. No filters, no studio lights, no renders.

Foldable Ruins on a game mat under store lighting, exactly as it comes out of the box. If it looks good here, it'll look good on your table.

Every Print Inspected, Every Time

"Inspected prior to shipment" is what everyone says. Here's what we actually do. Four steps, every piece, before it's allowed in a box.

Before every print

Calibrated first, every time

The calibration routine runs before every single job. A physical test print goes through weekly, to catch a machine whose routine has started lying to us.

Premium Profile

Dialled in over hours of printing

More wall perimeters than the two most printers ship with, and enough infill that these are structural, not shells. It took a lot of failed prints to find that combination, so it stays in-house.

After the print

Inspected under a raking lamp

Every piece checked for stringing, warping and layer separation. Angled light shows what flat light hides.

If it fails

Reprinted, not shipped

No seconds, no B-grade, no "it's mostly fine."

No Crap From Reddit

Premium Terrain By Detail Obsessed Designers

Plenty of shops will print any free STL they pulled off Reddit and sell it to you as a product: unvetted, unlicensed, and never test-printed.

We work under licence with every designer we print. This set is designed by FabricatorsLair.

And we don't list a model until we've printed it and pushed a real 32 mm base through every doorway, floor and upper level on it. If your models can't physically stand where the terrain says they can, it doesn't go on the store, no matter how good the render looked.

Which is why "28–32 mm compatible" on this page isn't a spec copied off a designer's listing. It's something we checked, on this model, before deciding it was worth selling you.

FAQs

Do I have to build it?

No. Every building arrives assembled and ready to play. There's no glue, no magnets, no clips and no instruction sheet. Unfold it and put models on it.

How small does it actually fold?

Every ruin hinges shut to less than an inch thick. A complete 30-piece table collapses into a stack you can carry in one hand.

Will the hinges break?

They're printed as part of the building, not glued or pinned on, so there's no join to come apart. Fold it, bag it, drop something on it... it holds up

Do I have to paint it?

No. The matte finish is table-ready as-is, in grey or black. If you do want to paint, it takes primer normally.

How is this different from cheap STL files I could print?

You'd need a printer ($200–500), the learning curve, 44+ hours of print time, and the cleanup. This arrives complete and assembled.

How fast does it ship?

Most items are made to order and ship within 1–2 business days. Larger sets can take up to 10 days.

Shipping cost?

Free Canada-wide on orders $75+. Low flat rates below that.

What if I don't like it?

30-day money-back guarantee. If it doesn't pack down smaller than the terrain you own now, send it back for a full refund.

What We Bring to the Table

3D printer in action with a partially completed architectural model on a dark background

Quality Printing

Every piece is printed on calibrated machines with premium PLA filament. We inspect each item before shipping to ensure your terrain is ready for the table (or the paint station).

Licensed Designs

We work directly with talented designers and print under official licenses. You get quality designs from trusted creators, manufactured with care and precision.

Fast Turnaround

Made to order doesn't mean made to wait. Most orders are printed, inspected, and shipped within 2-3 business days. Your battlefield is waiting.